- Used for setting of measuring instruments like horizontal comparators, length measuring machines for ID checking, dial bore gauges etc.
- Made from oil hardening non shrinking gauge steel, hardened and tempered to 60-62 HRC
- Sub-zero treated at -80 °C for long term dimensional stability
- Actual dimensions duly etched
- Calibrated at 20 °C under Standards room condition against national/international traceable standards
- Certificate of calibration is provided along with each master traceable to national/international standards, certificate under NABL (as per ISO 17025) as per request
- Manufactured as per DIN2250-1 Type C
- Master Setting Rings also supplied in standard set consisting of sizes:
- Set 1: Ø4.0, Ø5.0, Ø6.0 & Ø8.0 mm
- Set 2: Ø10.0, Ø12.0, Ø16.0 , Ø20.0 & Ø25.0 mm
- Set also supplied as per customer’s requirement
Technical Info
(Master Setting Ring Range 1.5 – 315 Mm )01mm-100mm
| Ød1 ABOVE | UPTO & INC. | Ød2 | b1 |
|---|
| 1.5 | 2.5 | 22 | 4 |
| 2.5 | 5.0 | 22 | 5 |
| 5.0 | 10.0 | 32 | 8 |
| 10.0 | 15.0 | 38 | 10 |
| 15.0 | 20.0 | 45 | 12 |
| 20.0 | 25.0 | 53 | 14 |
| 25.0 | 32.0 | 63 | 16 |
| 32.0 | 40.0 | 71 | 18 |
| 40.0 | 50.0 | 82 | 20 |
| 50.0 | 60.0 | 100 | 20 |
| 60.0 | 70.0 | 112 | 24 |
| 70.0 | 80.0 | 125 | 24 |
| 80.0 | 90.0 | 140 | 24 |
| 90.0 | 100.0 | 160 | 24 |
100mm-315mm
| Ød1 ABOVE | UPTO & INC. | Ød2 | b1 |
|---|
| 1.5 | 2.5 | 22 | 4 |
| 2.5 | 5.0 | 22 | 5 |
| 5.0 | 10.0 | 32 | 8 |
| 10.0 | 15.0 | 38 | 10 |
| 15.0 | 20.0 | 45 | 12 |
| 20.0 | 25.0 | 53 | 14 |
| 25.0 | 32.0 | 63 | 16 |
| 32.0 | 40.0 | 71 | 18 |
| 40.0 | 50.0 | 82 | 20 |
| 50.0 | 60.0 | 100 | 20 |
| 60.0 | 70.0 | 112 | 24 |
| 70.0 | 80.0 | 125 | 24 |
| 80.0 | 90.0 | 140 | 24 |
| 90.0 | 100.0 | 160 | 24 |
| Nominal Diameter Range (mm) | Size Tolerance (mm) | Roundess & Parallelism |
|---|
| 1-3 | ± 0.0015 | 0.0003 |
| 3-6 | ± 0.002 | 0.0004 |
| 6-10 | ± 0.002 | 0.0004 |
| 10-18 | ± 0.0025 | 0.0005 |
| 18-30 | ± 0.003 | 0.0006 |
| 30-50 | ± 0.0035 | 0.0007 |
| 50-80 | ± 0.004 | 0.0008 |
| 80-120 | ± 0.005 | 0.001 |
| 120-180 | ± 0.006 | 0.0012 |
| 180-250 | ± 0.007 | 0.0014 |
| 250-315 | ± 0.008 | 0.0016 |